สำหรับผู้ที่ชื่นชอบ Arduino ออกมาแล้วครับ 3D Printer โดย Arduino เอง
มีสองแบบ เเบบประกอบร้อย กับแบบ kit ราคาตามไปดูได้ที่ http://arduino.cc/en/Main/ArduinoMateria101
Arduino Materia 101 เป็น 3D printer ตัวแรกที่ผลิตโดย Arduino และได้ใช้ Arduino Mega2560 เป็นตัวควบคุมการทำงาน
โดยขนาดตัวที่มีขนาดเล็ก ทำจากเหล็กและการออกแบบที่ง่ายต่อการทำความเข้าใจการทำงานสำหรับมือใหม่ในงาน 3D หรือสำหรับมืออาชีพที่ต้องการปรับแต่งเพื่อการทดลอง
Arduino Materia 101 ออกแบบบนพื้นฐานของ Open source ทั้ง Hardware และ Software และยังสามารถทำงานร่วมกับโปรแกรมออกแบบชนิดอื่นได้อีกด้วย
โดยเสปคมีดังนี้
Summary
| Color | White |
| Body | Stainless steel covered by white plexiglass |
| Carter | Plexiglass |
| Screen | LCD monitor (20x4) |
| Minimum layer thickness | 0.1mm |
| Size | 310x350x330 mm |
| Print Area | 140x100x100 mm |
| Printing technology | Fused Filament Fabrication |
| Suggested filament | 1.75mm PLA |
| Experimental filaments | Cristal Flex, PLA termosense, TPU, PET, PLA Sand, PLA Flex (1.75mm) |
| X & Y resolution | 0.06 mm |
| Z resolution | 0.1 mm |
| Extruder (diameter) | 0.35 mm |
| PLA suggested temperature | 200-230 °C |
| Absorption | 65 W |
| Weight | 10 kg |
| Extruder block with pressure adjustment on filament | |
| Bearings recirculating ball on all axes | |
| Z axis movement with trapeizoidal screws | |
| Adjustable printing plate | |
| Micro USB to update the firmware | |
| Possibility to print directly from SD card |
Blogger Comment